ATI's Straton Pro 153 draws up to 215 W. It is shown here as one curve, not split into channels, so it is set with Intensity only. Below is that curve at full intensity.
Peaks near 442, 462 and 632 nm.
Royal blue 26%, violet 19%, blue 19%, green 17%, red 8%, yellow 6% and UV 5% of its power.
No PAR estimate for the ATI Straton Pro 153. ATI publishes no PAR table, and no reading of a Straton Pro at a known height and setting was found; the readings found are for the original Straton.
Spectrum read from ATI Aquaristik's Straton Pro site (thisispro.atiaquaristik.com), graph 'Spektrum der Straton', relative intensity; setting and generation not stated. See the graph.
ATI's graph on its Straton Pro site does not say its setting, and it was published before the Gen 2 fixture. Its peaks, about 440 and 462 nm, sit 10 nm below the Gen 2 LED list's royal blue 450 and blue 470, so it may show the first generation.
ATI lists the Gen 2 153's LEDs (UV 405 x9, violet 420 x12, royal blue 450 x30, blue 470 x39, cyan white x30, clean white x18, cyan 500 x6, red x9) but not its whites' colour or its red's wavelength, and the graph may show another generation, so the curve is not split into ATI's seven channels.
ATI shares power between the colours, so every channel at 100% may be held below the sum of their parts.
ATI's own page for it: ATI Straton Pro 153.
No PAR estimate for the ATI Straton Pro 153. ATI publishes no PAR table, and no reading of a Straton Pro at a known height and setting was found; the readings found are for the original Straton.
reeffrags.com is not affiliated with or endorsed by ATI. The graph is theirs; the reading of it, and any error in that reading, is ours.
